top of page

Contracting & Technical Manpower

We take on production projects and run them end to end. We study the project, set up its stages, commission a skilled team, and track every step online. You see progress, bottlenecks and waste as they happen, so delivery stays fast and on track.

How We Scale Your Production

Every project we take on follows the same disciplined path, and every step produces data.

1. Study the project

The first few days go into understanding the project and setting up its full life cycle.

4. Run it on structured data

All of this sits in a structured data model, so operations flow through the system and data is generated every shift.

Technology-driven execution, so you can maximise your output.

2. Break it into stages

We split the work into clear stages and design the most practical way of working. We start with a simple working version (an MVP) and do not lose time on over-planning.

5. Find the bottlenecks

The data shows where time is going and where work is getting stuck.

3. Commission the right team

Each stage gets people with the skills it needs.

6. Remove waste, keep optimising

We identify and strip out waste using lean manufacturing methods and find the best path for the situation. Production is a moving environment and supply of items changes every time, so we work from data on the fly.

Production Services

Assembly, wiring and testing of equipment, carried out in the factory by our team.

Electronic Controllers (EC)

Assembly, wiring and testing of electronic controllers for rectifiers, executed to your drawings.
Automatic Voltage Regulator (AVR)

Assembly, wiring and testing of automatic voltage regulator units, executed to your drawings.
De-Energized Tap Changer

Assembly and testing of off-circuit tap changers for transformers, executed to your drawings.
card-11kv-vcb-700.jpg
11KV Air Insulated Vacuum Circuit Breaker (AIS VCB) 700mm

Assembly, wiring and testing of the 700mm-wide 11kV vacuum circuit breaker panel, executed to your drawings.
card-11kv-vcb-820.jpg
11KV Air Insulated Vacuum Circuit Breaker (AIS VCB) 820mm

Assembly, wiring and testing of the 820mm-wide 11kV vacuum circuit breaker panel, executed to your drawings.
33KV Air Insulated Vacuum Circuit Breaker (AIS VCB) 1300mm

Assembly, wiring and testing of the 1300mm-wide 33kV vacuum circuit breaker panel, executed to your drawings.
Remote Tap Changer Control (RTCC)

Assembly, wiring and testing of remote tap changer control panels, executed to your drawings.
card-grp.jpg
Generator Relay Protection (GRP)

Assembly, wiring and testing of generator relay protection panels, executed to your drawings.
card-crp.jpg
Control and Relay Panel (CRP)

Assembly, wiring and testing of control and relay panels, executed to your drawings.
11 kV Vacuum Circuit Breaker Feeder (11KV VCB Feeder)

Assembly, wiring and testing of 11kV vacuum circuit breaker feeder panels, executed to your drawings.
Motor Operated Mechanism Box (MoM box)

Assembly, wiring and testing of motor operated mechanism boxes, executed to your drawings.
Diesel Electric Tower Car (DETC)

A railway vehicle used for overhead equipment (OHE) inspection and maintenance. We carry out the reliable execution of all its components: Cab 1, Cab 2, MSGC, Driver Desk 1 and Driver Desk 2.

Installation Services

Installation and commissioning at your site.

11KV AIS VCB Board: Installation & Commissioning

Our team installs the board at your site, completes the connections, and commissions it after testing.
33KV AIS VCB Board: Installation & Commissioning

Our team installs the board at your site, completes the connections, and commissions it after testing.
DISCUSS A PROJECT

Tell us about your project

Tell us what you need executed. We will come back to you.

Scope of work
bottom of page